Floor Renovation Coating Systems

Floor Renovation Solutions

Fix Worn Floors with a 3-Step System

Old floors fail for simple reasons: cracks open, dust comes up, and the top surface wears out. A new coating can solve this—if the floor is repaired and primed first.

ZDSpoxy is an epoxy resin manufacturer and floor coating supplier. We provide custom floor renovation systems and wholesale supply for contractors, projects, and distributors.

Quick Check: What Problem Are You Solving?

Choose the closest match:

Cracks / chips / holes: repair first, then coat
Dusty concrete: primer is required
Stains / uneven color: choose a high-opacity topcoat
Need fast reopening: choose fast-cure options
Outdoor or sunlight exposure: consider UV-stable topcoats

Recommended Floor Renovation Systems (3 Options)

All three systems follow the same order: Repair → Primer → Topcoat.

Option A — Epoxy Topcoat System (Strong + Cost Effective)

Step 1: fast crack repair grout / repair material
Step 2: epoxy primer
Step 3: 2K epoxy coating
Best for: factories, garages, basements, commercial spaces, where strength matters.

Option B — PU (Polyurethane) Topcoat System (Comfort + Scratch Resistance)

Step 1: fast crack repair grout / repair material
Step 2: epoxy primer
Step 3: 2K polyurethane coating
Best for: areas that need a softer feel and better scratch resistance.

Option C — Polyaspartic Topcoat System (Fast Cure + UV + Durability)

Step 1: fast crack repair grout / repair material
Step 2: epoxy primer
Step 3: 2K polyaspartic coating
Best for: fast turnarounds, public areas, and projects needing quick return to service.

Epoxy vs PU vs Polyaspartic (Simple Comparison)

Topcoat Type	What you get	Best when you…
Epoxy	strong, stable, great coverage options	want value + strength
PU	comfort + scratch resistance	want a more flexible feel
Polyaspartic	fast cure + good outdoor performance	need speed or UV/weather resistance

If you tell us your surface + use + timeline, we’ll recommend a system that fits.

Recommended Products

Below are common SKUs used for floor renovation. We can also provide a custom kit list and wholesale pricing.

Product Model	Key Benefits	Typical Use	View More
ZDS1340AB	Highly hydrophobic; low water absorption; high-strength repair (compressive strength >60–80 MPa)	Crack/void repair and patching before primer; floor repair in damp areas	View ZDS1340AB
ZDS1271AB	Solvent-free epoxy primer; strong adhesion & sealing; next step can be done after ~2 hours	Primer for ceramics and floor pretreatment; improves durability and corrosion resistance	View ZDS1271AB
ZDS1090AB	Epoxy primer for concrete & ceramic flooring; sealing + adhesion; next step after 24h	Primer for porous concrete / ceramic flooring before topcoat	View ZDS1090AB
ZDS4103AB	2K high-opacity epoxy topcoat; fast curing (2–3h @25°C); formaldehyde-free, zero VOC emissions; chemical/abrasion resistant	Epoxy topcoat for industrial flooring, garages, basements, public facilities	View ZDS4103AB
ZDS1140AB (fast colored option)	2K polyaspartic colored coating; cures 2–4h @25°C; VOC ≤50 g/L; indoor/outdoor	Colored topcoat for commercial public areas, parking lots, and renovation projects	View ZDS1140AB
ZDS1990AB (fast clear option)	2K clear polyaspartic waterproof coating; cures 2–4h; low VOC	Clear protective finish where you want a clean “clear coat” look	View ZDS1990AB

Installation Overview (Easy Checklist)

A simple order that works:

Clean (remove dust, oil, loose coatings)
Repair cracks and weak spots (don’t coat over damage)
Sand / grind if the surface is smooth
Prime (thin, even coat)
Topcoat (even coats, don’t flood it)
Cure before heavy use

Tip: Most failures come from poor prep or coating too thick in one pass.

Typical Timeline (What to Expect)

Your timeline depends on the chosen topcoat and jobsite conditions:

Repair and prep: often same day (depends on damage)
Primer: some primers allow next step after ~2 hours (system dependent)
Fast topcoat options can cure in a few hours at 25°C (product dependent)

If you need a fast reopening (stores, warehouses, public areas), tell us your deadline.

Common Mistakes to Avoid

Coating over dusting concrete (no primer)
Skipping crack repair
Not grinding smooth surfaces
Applying one thick coat (traps bubbles and reduces strength)
Opening to traffic too early

FAQs

What’s the best coating for a warehouse floor?

Often epoxy is a strong and cost-effective choice. If you need faster return-to-service, polyaspartic options can help.

Can I cover stains and patch marks?

Yes. A high-opacity topcoat can hide substrate defects and reduce coats.

Do you offer custom and wholesale supply?

Yes. ZDSpoxy is a floor coating manufacturer and supplier. We support custom systems and wholesale orders.

Get a Floor System Recommendation

Send us these details, and we’ll reply with a full system (repair + primer + topcoat) and pricing:

Floor type (concrete / old coating / tile)
Area size (sqm or sqft)
Use case (warehouse / garage / shop / public area)
Color or clear finish
Your timeline (when it must reopen)

We’ll recommend a custom system and offer manufacturer-direct wholesale pricing.