Swimming Pool Waterproofing
Swimming Pool Waterproofing Solutions
A Simple System That Handles Water, Movement, and Wear
Swimming pools are tough on coatings. You have long-term water contact, temperature changes, and surface movement. That’s why a pool needs a layered system, not just one coat.
ZDSpoxy is an epoxy resin manufacturer and waterproof coating supplier. We provide custom pool waterproofing systems and wholesale supply for contractors, projects, and distributors.
- No middlemen
- Fast prototyping
- Private label available
Recommended Pool System (3 Layers)
For swimming pools, we recommend this structure:
Step 1: Epoxy Primer
Step 2: Epoxy Flexible Middle Coat
Step 3: Colored Polyaspartic Topcoat
Why this works (in plain words):
- Primer = makes everything stick
- Flexible middle coat = helps handle movement and adds thickness
- Topcoat = waterproof seal + wear layer + clean finish
Where This Pool System Works Best
- New pools that need a durable finish
- Renovation pools with micro-cracks
- Pool decks / wet zones around pools
- Public facilities that need fast maintenance cycles
If you’re coating a pool area (not inside the pool), we can also recommend clear or matte clear options where needed.
Recommended Products
Below are common SKUs used to build the pool system (manufacturer-direct). We also support custom kits and wholesale pricing.
| Product Model | Key Benefits | Typical Use | View More |
| ZDS1271AB | Solvent-free epoxy primer; strong adhesion + sealing; next step can be done after ~2 hours | Pool substrate primer to improve bonding and durability | View ZDS1271AB |
| ZDS1341AB | Epoxy mid coat for thickness + strength; filling/leveling; strong adhesion; construction-friendly | Flexible middle layer in multi-layer systems (supports system build-up) | View ZDS1341AB |
| ZDS1140AB | 2K colored polyaspartic coating; cures 2–4h @25°C; VOC ≤50 g/L; suitable for indoor wet areas and commercial public areas | Colored waterproof topcoat for pools / wet zones / public facilities | View ZDS1140AB |
| ZDS1340AB (repair, optional) | Hydrophobic repair mortar; strong repair; suitable for humid environments; also noted for damp areas around pools | Patch cracks/pits before primer, especially in damp pool environments | View ZDS1340AB |
| ZDS1990AB (clear option for pool area) | 2K clear polyaspartic waterproof coating; listed for commercial restrooms / pool area applications | Clear protective finish for pool-side areas when you want a transparent look | View ZDS1990AB |
Installation Overview (Easy Checklist)
A simple order that works:
- Prep + repair
- Apply epoxy primer (thin, even)
- Apply epoxy middle coat (build thickness)
- Apply colored polyaspartic topcoat (seal + protect)
- Let it cure before water exposure
Tip: Two even coats are safer than one thick coat.
Common Mistakes to Avoid
- Priming over dust or weak substrate
- Skipping crack repair
- Applying coats too thick (can trap bubbles)
- Letting rain/water hit the coating before cure
- Ignoring corners, joints, and drains
FAQs
Why do pools need a “middle coat”?
Because pools move and stay wet. A middle coat helps build system thickness and improves overall reliability in multi-layer systems.
Can this system be used around the pool too?
Yes. Pool-side wet zones are common applications, and clear options are also available when needed.
Do you offer custom and wholesale supply?
Yes. ZDSpoxy is a coating manufacturer and supplier. We support custom system matching and wholesale orders.
Get a Pool System Recommendation
Send us these details and we’ll reply with a full system + pricing:
- Pool type (new / renovation)
- Surface (concrete / tile / old coating)
- Area size (sqm or sqft)
- Finish preference (colored / clear for pool-side)
- Photos of cracks and corners
- Your timeline
We’ll recommend a custom system and offer manufacturer-direct wholesale pricing.