High temperature material

ZDS High temperature resistant epoxy resin 100-1ab

  • Performance and use:
       This product is a high temperature curing two-component epoxy adhesive. With storage stability it is easier to use these two components. Thixotropy and adaptive characteristics. It is mainly used for the RTM/vacuum infusion technology to make the carbon fiber composites.High temperature resistance of 250 degrees celsius for a long time.
  • Shelf time:2020-03-18 22:08
  • Product description: Typical indicators : Model 100-1A (epoxy resin ) 100-1B (hardener) Exterior Transparent liquid Transparent liquid Use ratio 1:0.8 Viscosity (Pa.s 25 C) 800-900 100MAX Curing conditions Heat curing:130℃ 60minute/150℃30Minute Shear stren
Typical indicators:
 
Model 100-1A (epoxy resin ) 100-1B (hardener)
Exterior Transparent liquid Transparent liquid
Use ratio 1:0.8
Viscosity (Pa.s, 25 ° C) 800-900 100MAX
Curing conditions Heat curing:130℃  60 minute/150℃ 30Minute
Shear strength (AL / AKL, kg / mm2) 21
Volume resistance 25 ℃ ohm-cm 3.2×1015
Surface resistance 25 ℃ ohm 3.4×1014
Withstand voltage 25 ℃ KV / mm 20~22
Tensile strength (mpa) 11~13
Compressive strength kg / mm2 12~13
Hardness SHORE D 83~85
Shrinkage <0.5%
Withstands temp reference:   400℃ (2 minutes)
350℃ (30 minutes)
250℃ for continuous use
Shelf life 12 month
Pot life 3 days