High temperature material

ZDS High temperature resistant epoxy resin 100ab

  • Performance and use:
       This product is a high temperature curing two-component epoxy adhesive for bonding and potting. With storage stability, high bonding strength, good insulation properties. It is easier to use these two components. Thixotropy and adaptive characteristics. It can be applied to the bonding of metals, plastics, glass and wood, electronic products.High temperature resistance of 250 degrees Celsius for a long time.
  • Shelf time:2020-03-18 19:59
  • Product description: Typical indicators : Model 100A (epoxy resin ) 100B (hardener) Exterior Transparent liquid Transparent liquid Use ratio 1:0.8 Viscosity (Pa.s, 25 C) 3000 500 Curing conditions Heat curing:130℃ 60minute/150℃30Minute Shear strength (AL /
Typical indicators:
 
Model 100A (epoxy resin ) 100B (hardener)
Exterior Transparent  liquid Transparent  liquid
Use ratio 1:0.8
Viscosity (Pa.s, 25 ° C) 3000 500
Curing conditions Heat curing:130℃  60 minute/150℃ 30Minute
Shear strength (AL / AKL, kg / mm2) 21
Volume resistance 25 ℃ ohm-cm 3.2×1015
Surface resistance 25 ℃ ohm 3.4×1014
Withstand voltage 25 ℃ KV / mm 20~22
Tensile strength (mpa) 11~13
Compressive strength kg / mm2 12~13
Hardness SHORE D 83~85
Shrinkage <0.5%
Withstands temp reference:   400℃ (2 minutes)
350℃ (30 minutes)
250℃ for continuous use
Pot life 3 days
Shelf life 12 month