High temperature material

ZDS High Temperature Resistant Epoxy Resin 4002-1AB

  • Performance and use
    This product is a high temperature curing two-component epoxy adhesive. With
    storage stability high bonding strength good insulation properties. It is easier to use than these two components. Thixotropy and adaptive characteristics. It can be applied to self-adhesion and mutual adhesion of metals ceramics and composite materials leakage of various containers cracks in the cylinder block bonding filling sealing plugging and repair of castings and bonding and sealing of heating parts of electrical appliances and meters and etc. High temperature resistance of -40~150-230 degrees Celsius for a long time.
  • Shelf time:2020-03-18 20:03
  • Product description: Typical indicators: Model 4002-1A (epoxy resin) 4002-1B (hardener) Exterior Transparentliquid Transparentliquid Use ratio 6-1(Weight ratio) Viscosity (Pa.s 25 C) 4500 2000 Curing conditions Cured at room temperature: The initial curingtime
Typical indicators:
Model 4002-1A (epoxy resin) 4002-1B (hardener)  
Exterior Transparent liquid Transparent liquid  
Use ratio 6-1(Weight ratio)  
Viscosity (Pa.s, 25 ° C) 4500 2000  
 
 
 
Curing conditions
Cured at room temperature: The initial curing time is 2hours at room temperature at 25 ° C, full curing time 24 hours.
Heat curing: It will be cured in 20 minutes when
the oven is at 100 ° C
 
Shear strength (AL / AKL, kg /
mm2)
≥20  
Volume resistance 25 ohm-cm 3.2×1015  
Surface resistance 25 ohm 3.4×1014  
Withstand voltage 25 KV / mm 20~22  
Tensile strength (mpa) ≥25  
Compressive strength kg / mm2 12~13  
Hardness SHORE D 86-90D  
Shrinkage <0.5%  
Temperature resistance range 180-300℃  
Long-term temperature resistance 150-230℃  
Shelf life 1 year  
Pot Life,25° C 20mins  
  Curing Time          Initial cure 2 hours
          Fully cured 24hours