High temperature material

ZDS High Temperature Resistant Epoxy Resin 4002-2AB

  • Performance and use
    This product is a high temperature curing two-component epoxy adhesive. With storage stability, it is easier to use these two components. Thixotropy and adaptive characteristics. It is mainly used for the RTM/vacuum infusion technology to make the carbon fiber composites.High temperature resistance of -40 ~ 150-230  degrees celsius for a long time.
  • Shelf time:2020-03-18 20:03
  • Product description: Typical indicators : Model 4002-2A (epoxy resin) 4002-2B (hardener) Exterior Transparentliquid Transparentliquid Use ratio 6-1(Weight ratio) Viscosity (Pa.s, 25 C) 800-900 100Max Shear strength(AL/ AKL, kg/ mm2) 20 Volumeresistance25 ohm-cm

Typical indicators:

 
Model 4002-2A (epoxy resin) 4002-2B (hardener)
Exterior Transparent liquid Transparent liquid
Use ratio 6-1(Weight ratio)
Viscosity (Pa.s, 25 ° C) 800-900 100Max
Shear strength (AL / AKL, kg /
mm2)
≥20
Volume resistance 25 ohm-cm 3.2×1015
Surface resistance 25 ohm 3.4×1014
Withstand voltage 25 KV / mm 20~22
Tensile strength (mpa) ≥25
Compressive strength kg / mm2 12~13
Hardness SHORE D 86-90D
Shrinkage <0.5%
Shelf life 1 year
Pot Life,25° C 30mins
Curing Time Initial cure 2 hours
Fully cured 24hours
Withstands temp reference   350℃ (2 minutes)
330℃ (30 minutes)
230℃ for continuous use
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
250