High temperature material

ZDS High temperature resistant epoxy resin 4002ab

  • Performance and use:
       This product is a high temperature curing two-component epoxy adhesive. With storage stability, high bonding strength, good insulation properties. It is easier to use than these two components. Thixotropy and adaptive characteristics.It can be applied to self-adhesion and mutual adhesion of metals, ceramics, and composite materials, leakage of various containers, cracks in the cylinder block, bonding, filling, sealing, plugging and repair of castings, and bonding and sealing of heating parts of electrical appliances and meters and etc., High temperature resistance of 250 degrees Celsius for a long time.
  • Shelf time:2020-03-18 20:07
  • Product description: Typical indicators : Model 4002A (epoxy resin ) 4002B (hardener) Exterior Gray liquid Light yellow liquid Use ratio 10:1 Viscosity (Pa.s, 25 C) 5000 500Max Curing conditions Cured at room temperature : It will be cured in 3-5 hoursat room t
Typical indicators:
Model 4002A (epoxy resin ) 4002B (hardener)
Exterior Gray liquid Light yellow liquid
Use ratio 10:1
Viscosity (Pa.s, 25 ° C) 5000 500Max
Curing conditions Cured at room temperature: It will be cured in 3-5 hours at room temperature is 25°C, it can reach the maximum bonding strength in 24 hours
Heat curing: It will be cured in 20 minutes when the oven is at 100 ° C
Shear strength (AL/AKL, kg/mm2) ≥20
Volume resistance 25 ℃ ohm-cm 3.2×1015
Surface resistance 25 ℃ ohm 3.4×1014
Withstand voltage 25 ℃ KV / mm 20~22
Tensile strength (mpa) ≥25
Compressive strength kg / mm2 12~13
Hardness SHORE D 83-85D
Shrinkage <0.5%
Maximum temperature resistance   350℃ (3-5 minutes)
Long-term temp resistance 250℃
Shelf life 12 month