High temperature material

ZDS High Temperature Resistant Epoxy Resin 4002-1AB

  • Product description: Typical indicators: Model 4002-1A (epoxy resin) 4002-1B (hardener) Exterior Transparentliquid Transparentliquid Use ratio 6-1(Weight ratio) Viscosity (Pa.s 25 C) 4500 2000 Curing conditions Cured at room temperature: The initial curingtime
Typical indicators:
Model 4002-1A (epoxy resin) 4002-1B (hardener)  
Exterior Transparent liquid Transparent liquid  
Use ratio 6-1(Weight ratio)  
Viscosity (Pa.s, 25 ° C) 4500 2000  
 
 
 
Curing conditions
Cured at room temperature: The initial curing time is 2hours at room temperature at 25 ° C, full curing time 24 hours.
Heat curing: It will be cured in 20 minutes when
the oven is at 100 ° C
 
Shear strength (AL / AKL, kg /
mm2)
≥20  
Volume resistance 25 ohm-cm 3.2×1015  
Surface resistance 25 ohm 3.4×1014  
Withstand voltage 25 KV / mm 20~22  
Tensile strength (mpa) ≥25  
Compressive strength kg / mm2 12~13  
Hardness SHORE D 86-90D  
Shrinkage <0.5%  
Temperature resistance range 180-300℃  
Long-term temperature resistance 150-230℃  
Shelf life 1 year  
Pot Life,25° C 20mins  
  Curing Time          Initial cure 2 hours
          Fully cured 24hours